Attention analytical equipment builders & OEMs....speed up your time to market and lower your cost along the way. Check out Parker's pre-packaged solutions utlizing their best-in-class electrical & mechanical components.
Here's an example for Liquid Handling:
Parker Life Sciences' systems and products, offered at "Selectable Levels of Integration," enabled a perfect fit solution to be found from standard catalog linear tables. Based on travel, load, throughput, and other performance criteria, the LXR linear-motor table and XR ball-screw table were selected as the primary mechanical components for this three-axis system. Two 404LXR units comprised the X & Y axes and a smaller 401XR was selected for the Z axis. Flexible options such as a long life cable management system, electric brakes, and inter-axis pinning greatly simplified the integrator's efforts.
Parker's ability to provide tables, motors, drives, guarding, and accessories, minimized the possibility of making costly mistakes which often occurs when components acquired from different manufacturers are not matched and sized correctly.
Analytical Instruments example
A manufacturer of lab automation analytical instruments presented the challenge of moving XYZ motion in a 300 x 300 x 100 mm stroke range in a package weighing less than 10 lbs and small enough to be portable. The customer needed light weight motion for smaller power requirements and ease of portability. The customer also needed a tightly integrated solution to minimize the instrument footprint.
Parker met the design challenges with their new LCR Series linear actuators and ion stepper drives combined with the LV Stepper motors ina complete system solution designed specifically for the application at hand utlizing these short lead time products. The LCR solution offers a complete integrated screw, bearing, motor design with a stainless stell strip seal to keep debris out of the unit and an optional stepper drive for easy motion integration.
Parker Product Solutions
LCR Series
- low cost
- rugged positioners
- easy to size, select and integrate
- compact footprint for minimized machine size
- various lead screws and belt driven options
- varying stroke lengths from 1 mm to 1000 mm
LV Series
- high performance
- value priced
- size 11 through 34
- encoders available
MX-80
- only 80 mm wide and less than 2 inches tall
- linear motor version for high precision high speed
- ball screw version for higher thrust capacity and long life
- lead screw options for cost concious applications
- stroke lengths up to 200 mm
- driven by stepper or servo motors
OFS
- microstepping drive and drive/oscillator
- small open frame, low cost design
- 12-42VDC input, 3.5A output
- step/dir version or speed control version
Workstations and Guarding
- smooth body extrusions with no grooves
- inch or metric profiles
- bundled solutions, kits or raw components
ion
- 12-24 VDC input with up to 2 amps current output
- standby and run current adjustability
- 1 inch square by 3 inches long
- 3200 steps per rev standard
Frameless Kit Motors
- high torque - from 0.06 Nm to 9.7 Nm
- high speeds - up to 50,000 RPM
- superior performance high stiffness & better response
- compact design minimizes product size
EX-DC
- microstepping drive / controller
- 24-48 VDC input, up to 4.8 A output current
- fully programmable
- on-board program storage and I/O
Interact X
- 21CFR11 compliance
- up to 17" color touchscreens
- COM drivers for 35+ manufacturers
- stainless steel bezel options
ACR9000
- 1 - 16 axis of control in a single box
- COM drivers for LabView
- stepper or servo controls
- on-board program storage and I/O
The Automation Group engineers at Cross are Parker experts - contact us at 800.866.4568 to assist with your application.
No comments:
Post a Comment